CERAMIC LINED RUBBER HOSE
Ceramic Lined Rubber Hose
Ceramic lined hoses are designed for applications with severe wet sliding wear and erosion that can quickly wear out conventional rubber mining hoses where the conventional unlined rubber hose requires frequent replacement. Also, ceramic lined rubber hose can be installed at some kind of vibration machinery or with some non-stationary equipment. It can increase the selection for engineers with widely approaches of installation and operation. Embedded in rubber means the tiles absorb and dissipate impact, while reinforced rubber absorbs noise and vibration.
Technical Specifications:
l 
Nominal diameter: DN20~1000
l Hose length: Depend on the caliber size of the hose.
l Pressure level: 0~16Mpa can be customized higher
according to requirements.
l Temperature: rubber + custom ceramic -20℃~90℃
l Connection method: flange, thread, etc.
l Flange type: GB, ANSI, JIS, etc.
l Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional.
l Reinforcement material: Synthetic fabric and wire
l Shell material: UV-resistant, ozone-resistant rubber
l Connection material: carbon steel, stainless steel, etc.
Features:
1. Wear resistance
The wear resistance of ceramic lined rubber hose is 10 times higher than that of ordinary steel pipe and is 20 times more than that of common hose;
2. Corrosion resistance
Ceramic and high-quality anti – corrosive rubber can resist all the harsh conditions;
3. Impact resistance
The impact on ceramics force moment by rubber buffer and absorption, so wear-resistant ceramic rubber hose for larger particles impact;
4. Light weight
Weight is only 30% of steel pipes;
5. Flexible
The design of the cylindrical ceramic inside the rubber and the precise arrangement makes the pipe with good flexibility, large angle bending will not have any effect on the ceramic;
6. Convenient and quick installation
Provide with connections of fixed flange, active flange, screw, or quick connector.
